Looking for an elegant, festive Easter wreath that’s easy to make and perfect for your home? You’re in the right place! Today, I’ll walk you through how to create a beautiful Easter grapevine wreath step by step. This project is simple, stylish, and a fresh take on Easter decor—without the usual candy-colored overload. I’ve made plenty of wreaths, and this one is definitely a favorite! Grab your materials, and let’s get started!
Materials You’ll Need
Before we dive in, gather these supplies:
- 8-inch grapevine wreath base (Michaels)
- 9×6.5-inch wooden cross (Dollar Tree)
- 2.5-inch wired ribbon in beige (Costco)
- Yellow and white Easter lilies
- Pipe cleaners (light brown & dark brown)
- Varathane wood stain in dark walnut
Tools
- Parchment paper
- Paper towels
- Hot glue gun
- Old t-shirt (for wiping stain)
- Scissors
- Small pliers (to remove excess leaves from the grapevine wreath)
- Foam brush
- Emery board & sanding block
- Rubber gloves
Step 1: Prep the Wooden Cross
I always start by sanding the wooden cross to remove rough edges and splinters. Once it’s smooth, wipe it down with a damp rag and let it dry.
Next, apply a coat of wood stain using a foam brush. One coat is usually enough, but if you like a darker finish, you can add another layer. I wipe off any excess stain with an old cotton t-shirt to prevent a sticky residue. Let it dry completely before moving on.
Step 2: Prep the Grapevine Wreath
Grapevine wreaths often come with loose leaves, twigs, and tangled branches. I always take a few minutes to clean mine up by trimming stray pieces and removing any debris. This makes the wreath look neater and gives a smoother surface to work with.
Step 3: Make an Easy Bow
For this simple yet elegant bow, you’ll need:
- Eight pieces of ribbon, each cut to 24 inches
- One pipe cleaner
To make the bow:
- Cut all eight pieces of ribbon to around 24 inches long.
- Dovetail the ends (or cut them at an angle, or leave them ragged—it’s up to you!).
- Fold each piece in half, then gather it about 4–5 inches down from the fold.
- Hold each gathered piece between your fingers until all eight are prepped.
- Bundle them together with a pipe cleaner, twisting it tightly to secure.
- Spread out the ribbon tails and fluff the loops to shape the bow.
I love how easy this method is—it always gives a professional-looking bow with minimal effort!
Step 4: Attach the Cross
To attach the wooden cross to the wreath, glue pipe cleaners to the back. Let the glue dry, then add a second layer for extra security. Once set, twist the pipe cleaners around the grapevine wreath to hold the cross in place.
Step 5: Add the Florals
Cut your Easter lilies from their stems, leaving enough length to tuck them into the wreath. Arrange them on either side of the cross for symmetry.
If you want a reusable wreath, simply wedge the flowers into the grapevine base without glue. Otherwise, use hot glue to secure them permanently. I personally love the flexibility of a no-glue approach, but if you want something long-lasting, glue is the way to go!
Step 6: Attach the Bow
Center the bow at the base of the cross and secure it with a pipe cleaner. If the pipe cleaner is too short, twist two together to extend it. Once secured, fluff the bow for a neat, full look.
Step 7: Add a Hanging Loop
To hang your wreath, use a zip tie to attach a piece of jute cord to the back. This method is much easier than trying to thread the cord through the wreath itself.
The Final Reveal!
And just like that—your stunning Easter wreath is complete! This neutral, elegant design is perfect for any decor style, adding just the right amount of festive charm.
What do you think? Let me know in the comments below! If you want to see this wreath come together step by step check out the full length video below & don’t forget to subscribe so that we can continue to get crafty together.
Toodleloo!
